|
|
| |
10 Dry Contact / Potentialfreie Kontak Sensor
|
| |
|
| |
10 Dry Contact Inputs
An optional feature of the sensorProbe2D is the ability to have up to 5 dry contact inputs per RJ45. This gives a total maximum possible inputs of 10 per sensorProbe2D by utilizing both of the RJ45 sensor ports.
These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.These additional sensors are labeled as ports 3 to 12.
Specifications & Features:
Measurement range - Alarm or Normal
Communications cable - RJ-45 jack to sensor using UTP Cat 5 wire
Sensor type - open/closed contact switch
Input voltage range. 0 to 5 volts
Normal input voltage is settable under software
Normally open, normally closed is settable under software
Power source: powered by the sensorProbe. No additional power needed
Measurement rate - multiple readings every second
Up to 5 dry contact inputs per RJ-45 making upto 10 dry contact inputs in sensorProbe2.
|
|
Motto des Tages |
|
|
Es ist immer nur eine Vorstellung die etwas zulässt oder verhindert. |
|
Kontakt |
|
|
|
Online Portale |
|
Hersteller |
|
TOP Produkte |
|
|
|
Serverraum Gesamtlösungen |
APC Ersatzbatterien
RBC Replacement Battery Cartridge |
|
|
Austauschbatterien |
|
|
|
|
senorprobe2 |
|
|
Überwachung von 2 Umgebungsvariablen wie Temperatur und Lufeuchtigkeit (Bewegung, Wasser, Rauch...) über SMS, SNMP und E-Mail |
|
AdderView CATx IP |
|
|
4 User Matrix KVM Switch
1x Lokaler User
2x Remote User über CATx
1x Globaler User Über IP
16 und 24 Port Variante
PS/2, USB, SUN, Audio
|
|
|
|
|
Remote Reboot
& Power Control
Redundancy Switching
A/B & Circuit Protection
Remote Control Systems Relay
Remote Switch &
Relay Control |
|
