2 Gigabit plus 16 fast Ethernet ports for copper and fiber
Gigabit Turbo Ring (recovery time < 300 ms), RSTP/STP
(IEEE802.1W/D) for Ethernet redundancy
QoS, IGMP snooping/GMRP, VLAN, LACP, SNMP V1/V2c/
V3, RMON supported
Rate Limiting for bandwidth management, and broadcast
storm protection
IEEE802.1X and https/SSL to enhance network security
Introduction
EDS-518A is a standalone 18-port managed Ethernet switch that provides 2 combo gigabit ports with built-in RJ45 or SFP ports for gigabit optic communication. The gigabit Ethernet Redundant Turbo Ring (recovery time < 300 ms) increases the reliability and speed of your network backbone. EDS-518A also supports intelligent network management functions, including QoS, IGMP Snooping/GMRP, VLAN, Port Trunking, SNMP V1/V2c/V3, IEEE 802.1X, and https/SSL.
Features
Industrial Networking Capability
Redundant Gigabit Ethernet Ring (recovery time < 300 ms at full load) and RSTP/STP (IEEE802.1W/D)
IGMP Snooping and GMRP for filtering multicast traffic from industrial Ethernet Protocols
Supports IEEE802.1Q VLAN and GVRP protocol to ease network planning
Supports QoS-IEEE802.1p/1Q and TOS/DiffServ to increase determinism
Supports 802.3ad, LACP for optimum bandwidth utilization
Supports IEEE802.1X and https/SSL to enhance network security
SNMP V1/V2c/V3 for different levels of network management
RMON for efficient network monitoring and proactive capability
Designed for Industrial Applications
Bandwidth management prevents unpredictable network status
Supports ABC-01 (Automatic Backup Configurator) for system configuration back up
Lock port for authorized only MAC address access
Port mirroring for online debugging
Automatic warning by exception through email, relay output
Digital inputs to integrate sensors and alarms with IP networks
Automatic recovery of connected device’s IP addresses
Line-swap fast recovery (Patented)
Redundant, dual DC power inputs
IP30, rugged high-strength case
Long-haul transmit distance of 40 km or 80 km
DIN-Rail or panel mounting capability
Send ping commands to identify network segment integrity
Redundant 12-45 VDC power inputs and over current protection
Recommended Software and Accessories
SNMP OPC Server Pro
DR-4524, DR-75-24, and DR-120-24 DIN-Rail 24 VDC Power Supply Series
|
