|
|
| |
M1-1P0 - DVI (Digital Visual Interface) Extender Kabel bis 100 Meter |
Strech DVI - DVI Extension - DVI Extender - DVI Verstärker |
| |
|
|
| |
| |
|
M1-1P0, is designed to adopt hybrid cables, embedded copper wires for DDC/HDCP interconnection and fibers for graphic data together in a jacket so that it offers the benefits of sturdy metallic and compact size connectors. For the simplicity of installation, it is utilized +5V DC power of graphic cards to drive both of its transmitting and receiving modules so that it doesn't require a external power adaptor. For just in case, however, its optional model to use an external power adaptor is available.
The copper wire connection results in extension limit up to 100m. For over such limitation, disconnecting it, we customize to program the EDID (Extended Display Interface Data) parameters in an EPROM inside the transmitting module to specify user' displays complied with VESA. It enables graphic cards to virtually talk with displays at start-up, so which Opticis calls as vDDC (virtual DDC).
|
| |
Features:
Extend digital graphic signals upt to 100m with no signal degradation
Supports up to UXGA (1600x1200) resolution at 60Hz refresh rate
Complies with DVI Standad (165Mpixels/sec maximum and supports DDC2B Mode
Complies with HDMI Standard supporting HDCP parameters
Uses the PC host +5V source from the video card´s DVI pin number 14 to drive the Tx and Rx Modules, assumin a minimum of 500mA is availabel form the PC
Optional external AC/DC power version of teh cable is available upon request
Connectros are compact an light enough to directly plug into the graphic controller card and panel display
Data seucrity inherent wit fibre & no RFI/EMI emissions
No software requiered; just plug and go
Aplications:
Digital TFT-LCD FPDs, PDPs an projectros for medica imaging, air traffic control, factory automation, conference rooms, auditorium A/V Systems
|
| |
| Begriffe: |
| |
| DDC |
Digital Display Channel |
| DVI-D |
Digital Visual Interface. Digital Connection Only - no analag |
| EDID |
Extended Display Identification Data. EDID parameters are sent over the DDC link |
| EMI |
Electro Magnetic Interference |
| EMS |
Electro Magnetic Susceptibility |
| HDCP |
High Definition Content Protection |
| HDMI |
High Definition Multimedia Interface |
| RDP |
Plasma Display Panel |
| RFI |
RAdio Frequency Interference |
| TFT-LCD |
Thin Film Transitor Liquid Crystal Display |
| TMDS |
TRansimission Minimized Differnetial Signalling |
| VCSEL |
Vertical Cavity Surface Emitting Laser Tranmitter Diode |
| VESA |
Video Electronics Standards Association |
| |
|
|
| |
|
|
Ansprechperson |
Martin Hinterlehner
Geschäftsführung
Beratung & Verkauf
martin.hinterlehner@bellequip.at
Mobil: +43 (0) 664 33 33 999
Tel: +43 (0) 2822 33 33 999
Fax: +43 (0) 2822 33 33 995
Martin Hinterlehner
Beratung & Verkauf
Technik & Installation
martin.hinterlehner@
bellequip.at
Mobil: +43 (0) 664 33 33 999
Fax: +43 (0) 2822 33 33 995
 |
|
