10 Dry Contact / Potentialfreie Kontake für AKCP Rack Monitoring - Serverraumübwerwachung Lösungen

BellEquip GmbH
 

10 Dry Contact / Potentialfreie Kontak Sensor

 
 
10 Dry Contact Inputs

An optional feature of the sensorProbe2D is the ability to have up to 5 dry contact inputs per RJ45. This gives a total maximum possible inputs of 10 per sensorProbe2D by utilizing both of the RJ45 sensor ports.

These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.These additional sensors are labeled as ports 3 to 12.

Specifications & Features:

Measurement range - Alarm or Normal
Communications cable - RJ-45 jack to sensor using UTP Cat 5 wire
Sensor type - open/closed contact switch
Input voltage range. 0 to 5 volts
Normal input voltage is settable under software
Normally open, normally closed is settable under software
Power source: powered by the sensorProbe. No additional power needed
Measurement rate - multiple readings every second
Up to 5 dry contact inputs per RJ-45 making upto 10 dry contact inputs in sensorProbe2.

 

BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Österreich / Austria • Tel.: +43 (0)2822 33 33 999 • Fax: +43 (0)2822 33 33 995
Mobil: +43 (0)664 33 33 999 • Internet: www.bellequip.at • E-mail: info@bellequip.at

AKCP Übersicht | sensorprobe2 | sensorprobe8 | sensorprobe8-X20 | sensorprobe8-X60 | sensorprobe8L | sensorprobe8L-X20 | sensorprobe8L-X60 | cameraprobe8 | Notification Matrix | NMS Integration | Übersicht Sensoren | Temperatur | Single Port Temperatur / Luftfeuchtigkeits Sensor | Remote Temperatur. / Luftfeuchtigkeits Sensor | Wasser | Sicherheit / Security | Luftfluss / Airflow | Potentialfreie Kontakte | 10 Potentialfreie Kontakte | AC Voltage Detector | DC Voltage Sensor | 4 - 20mAmp Converter | Sensor Controlled Relay | Rauch / Smoke Detector | Bewegungmelder | Siren & Strobe Light | PTZ Camera Interface | Mobil Interface 1 | Mobil Interface 2 | Nokia Mobil Interface | Opening Screen | Connect | Other Connections Options | Internet Access Connection | User Authentication | Connection Sensor | Summary | Multi-Camera View | Camera View | Camera View Options | Setting Pan and Tilt | Go To | Information Summary | Page Disconnection

AKCP bietet Lösungen / Produkte für:

Rack Monitoring, Schrank Überwachung, IP-basierte Umweltüberwachungssyteme, RMS, Rack Monitoring Systeme, Tempertur Überwachung, Rack Überwachung, Luftfeuchtigkeit, Sicherheit, Wassser, Feuchtigkeit, Luftstrom, Bewegung, Luftbewegung, Security, Potentialfreie Kontakte, Türkontakt, Türkontakte, Rauch, Feuer, Brand, Hitze, Alarm, Ton, Schranküberwachung, Sensor, Sensoren, Temperaturüberwachung, Alamierung, SMS, Mobil, MMS, SNMP, Traps, Voice, Ton, Sprach, E-Mail, Messung, Environmental Monitoring, Umgebungsüberwachung, Umgebungs Überwachung, Umbgebungsbedingungen, Umgebungssensoren, Fernüberwachungssystem, Serverumgebung, Computerräume, Rechenzentrumsüberwachung, Temperaturfühler, Feuchtigkeitsfühler, Computerraum-Temperaturwarnung, Umweltüberwachung, Remote Monitoring, Fernüberwachung, Serverraum, DataCenter, Server Racks, Serverschrank, Bewegungsdetektor, sensorProbe2, sensorProbe2DC, sensorProbe8, sensorProbe8-X20, sensorProbe8-X60, sensorProbe8L, sensorProbe8L-X20, sensorProbe8L-X60, cameraProbe8, , Intelligent Sensors, Power Supplies, Notification Matrix, NMS Integration, Mobile Access, Mapping Module, Überwachungssystem der Serverumgebung, Fernüberwachungssystem von Serverumgebungen, Überwachung von Computerräumen, Temperaturfühler, Feuchtigkeitssensor, Temperaturalarm, Temperaturfühler, Temperatursensor, Luftfeuchtigkeitsfühler, Luftfeuchtigkeitssensor, Sicherheitssystem, Schaltschränke, Schaltschrank, Türkontak, Türkontaktsensor, Erschütterung, Erschütterungssensor, Rauchmelder