iBB-2C20 iBootBar von Dataprobe: 8 Port Power Control Center. Mulit-Outlet Power Manager. 10/100 Ethernet. Web. Telnet. SNMP. SSL

BellEquip GmbH
 

iBB-2C20 - 8 Port iBootBar für 10/100 Ethernet, WEB, Telnet, SNMP, SSL, Serial Port und internes Modem

 
iBB-810 - iBootbar
Dataprobe Power over IP

 • iBOOT
 • IP-410 / 810
 • iBB-810
 • iBB-C10
 • iBB-C10-M
 • iBB-2C10
 • iBB-2C10-M
 • iBB-C20
 • iBB-C20-M
 • iBB-2C20
 • iBB-2C20-M
 • COE-8
 
 
Get all the power of the iBoot and more with these multioutlet power strips. Control each outlet independently from
Web, Telnet, SNMP. Have network access plus out-ofband control via serial port and internal modem with both
data and DTMF tone dial control. Wherever you are, you
are in complete control.

iBootBar is available with single or dual power inlets. Dual power is ideal for remote reboot control servers, routers, etc. with redundant power supplies. Simultaneously switch both supplies off and on for reboot, security or energy
management. These models are also ideal for switching higher current devices. Each inlet is distributed to 4 outlets,
which can be switched in pairs for redundant systems, or individually for higher current devices.

Models are available for North American 15 and 20 amp circuits, as well as international 115/230 VAC, 15/10 amp.

The internal modem option allows connection to the iBootBar from anywhere, anytime. Dial-in with a laptop or
terminal for complete control of all functions, or access iBootBar with any telephone for quick power on, off or
reboot functions. Telephone users are guided with voice prompts and status information.

iBootBar continuously monitors the current draw from its outlets and reports user settable high and low current alarms. Know immediately when there is too much load, or a device stops working. Alarms are delivered both by email and SNMP traps.

Features Benefits

Multiple Control Options


• Web
• Telnet
• SNMP
• Serial
• Internal Modem – Menu and DTMF dial tones

Multi-User

Assign permissions to each user for outlets and configuration

Current Sensing and Alarms

Know when critical power conditions occur and take immediate action.

Dual and Single Power Inlet

Supports dual redundant powered devices with a single click.

Automatic Operation

Auto-Ping independently for each outlet.

Group and Stagger

Combine any outlets into logical groups and power up devices in sequence to reduce power surges.

Link Multiple units together

One IP address and interface for up to 256 outlets.

 
 
 

BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Österreich / Austria • Tel.: +43 (0)2822 33 33 999 • Fax: +43 (0)2822 33 33 995
Mobil: +43 (0)664 33 33 999 • Internet: www.bellequip.at • E-mail: info@bellequip.at

SD4002 | SD4008 | CM4001 | CM4001 Spezifikationen | CM4008 | CM4116 | CM4148 | CM4000 | SD-VUE/50 | SD-VUE/50A | SD-VUE/52A

AKCP Übersicht | sensorprobe2 | sensorprobe8 | sensorprobe8-X20 | sensorprobe8-X60 | sensorprobe8L | sensorprobe8L-X20 | sensorprobe8L-X60 | cameraprobe8 | Notification Matrix | NMS Integration | Übersicht Sensoren | Temperatur | Single Port Temperatur / Luftfeuchtigkeits Sensor | Remote Temperatur. / Luftfeuchtigkeits Sensor | Wasser | Sicherheit / Security | Luftfluss / Airflow | Potentialfreie Kontakte | 10 Potentialfreie Kontakte | AC Voltage Detector | DC Voltage Sensor | 4 - 20mAmp Converter | Sensor Controlled Relay | Rauch / Smoke Detector | Bewegungmelder | Siren & Strobe Light | PTZ Camera Interface | Mobil Interface 1 | Mobil Interface 2 | Nokia Mobil Interface | Opening Screen | Connect | Other Connections Options | Internet Access Connection | User Authentication | Connection Sensor | Summary | Multi-Camera View | Camera View | Camera View Options | Setting Pan and Tilt | Go To | Information Summary | Page Disconnection